Reconditioned Machinery

• Internal Mixers
• Hydraulic Presses
• 2 Roll Mills
• Calenders
• Extruders
• Ram Extruders/Preformers
• Bale Splitters
• Rubber Injection Moulders

Items of plant are currently available and can be supplied in one of these conditions :-

As is

Where we anticipate the machine can be put straight back into productions.

Reconditioned

When it is recommended that certain elements of the machine need replacing.

Fully Reconditioned

Only when a machine is very worn and only a total "Strip-Down", inspection of components, a total reconditioning programme involving new parts and rebuild will suffice.

Machines currently Available

Internal Mixers

Sample Models

1. Shaw K4 Intermix 84 litre chamber capacity, Ex Stock. ,
   Semi-Unidrive Complete with 2 speed drive, high pressure feed hopper and hydraulic drop door.
   
   
2. 11 D High Pressure feed hopper, Ex-Stock.
   
   
   
3. Size B.R. Laboratory Internal Mixer.
   Chamber capacity 1.5 litres - suitable for rubber and/or plastics. Reconditioned and modified to suit your requirements
   
   
4. 'OOC' Laborator Mixer,
   Chamber capacity 4.3 litres.
   
   
5. Uni-Drive Gearbox for 3D mixer.
   
   
6. 5) Various 'Z' Blade Mixers
   of 1 litre, 4 litres, 8 litres and 20 litres.

Two Roll Mills

Sample Models

1. BRIDGE 6" × 12" Laboratory Mill,
   
   
   
2. Bridge 12" x 18"Heavy Duty Compact Mill,
   With 50HP drive.
   
   
3. Iddon 12" x 20" Compact Mill.
   With Right Angle Drive.
   
   
4. Reed 16" x 42" Compact Mill.
   With Right Angle Drive.
   
   
5. Iddon 22" x 60" Compact Mill.
   With Right Angle Drive, fluted back roll.
   
   
6. Comerio 27" x 87" Mill.
   No Drive. Can be rebuilt and modified to suit your requirements.
   

Extruders

Sample Models

1. 90mm Shaw Rubber Extruder,
   
   
2. 120mm Shaw Rubber Extruder,
   15:1 L/D ratio.
   A cross head is available to combine items 2) and 3) as a complete unit.
   
3. 150mm Shaw Rubber Extruder,
   15:1 L/D ratio.
   
   
4. TROESTER 340mm Hot feed extruder,
   Rolled feed, 6:1 L/D.
   
   
5. FARREL/NRM 4½" Cold feed extruder,
   15:1 L/D.
   
   
6. TROESTER 90mm Cold feed extruder,
   8:1 L/D.

Calenders

Sample Models

1. ERMAFA Ø 710mm × 1800mm 4 Roll inverted 'L',
   Peripherally Drilled Rolls, Pre-Loading and cross axis facility, 4 D.C. drives through a Uni-Drive gearbox..

Hydraulic Presses

• We have available a wide stock of up and downstroking
  Presses from 80 tons, 100 tons, 120 tons, 150 tons etc. up to 2,500 tons.
• Please contact us with your requirements as our stock is continually changing

• If we do not have it - we can find it!

• We can also supply new platens for any Presses by using our deep hole drilling facility.

Sample Models

1. A line of 3 150 ton Upstroking Presses,
   Fully Reconditioned

2. 1,000 ton Upstroking Pre-cure Tread Press,
   Fully Reconditioned, On site in Portugal

3. Line of 100 ton Upstroking Presses,
   Reconditioned
   
   
4. 1000 ton Upstroking Press,
   Fully Reconditioned
   

Contact Us with your Requirements.
The availability of hydraulic presses is large and continually changing
With various platen sizes and clamp forces from 10 tons up to 2,500 tons.
Please refer to the hydraulic press section for example models.

Ram Extruders/Preformers

Sample Models

1. 'C3' Type Preformer
   

Contact Us with your Requirements.

Bale Splitters

We are currently Stock taking and this section will be updated soon.

Sample Models

We are currently Stock taking and this section will be updated soon.

Rubber Injection Moulders

Sample Models